RBC Bearings Inc.
RBC Bearings Inc.
Address: One Tribology Center
Oxford, CT 06478
Phone: (203) 267-7001
Fax: (203) 267-5000
Email: AeroInfo@RBCbearings.com
Print Back
Yoke Type cam followers are intended primarily for applications where loading conditions exceed the capabilities of stud type cam followers, or where clevis mounting is desired. Clevis mounting provides support on both sides of the cam follower and permits use of a high strength pin.
Crowned Outer Rings are used to minimize outer ring thrusting in applications where the axis of the cam follower is not parallel to the surface of the track or is skewed relative to the direction of travel. Crowned outer rings are a good selection for use with curved or circular tracks. In well aligned applications, crowned outer rings can cause accelerated track wear.
Y24L_FB
Unit of Measure
1 

Item #

Inside Diameter

Outside Diameter

Overall Width

Roller Width

Speed Limit

Dynamic Load Rating

Static Load Rating

CY24L N/A 0.25 in N/A 0.75 in N/A 0.5625 in N/A 0.5 in N/A 3930 rpm N/A 1800 lbf N/A 4150 lbf
CY28L N/A 0.25 in N/A 0.88 in N/A 0.5625 in N/A 0.5 in N/A 3930 rpm N/A 1800 lbf N/A 4150 lbf
CY32L N/A 0.31 in N/A 1.00 in N/A 0.6875 in N/A 0.625 in N/A 3140 rpm N/A 2300 lbf N/A 6150 lbf
CY36L N/A 0.31 in N/A 1.13 in N/A 0.6875 in N/A 0.625 in N/A 3140 rpm N/A 2300 lbf N/A 6150 lbf
CY40L N/A 0.38 in N/A 1.25 in N/A 0.8125 in N/A 0.75 in N/A 2620 rpm N/A 4200 lbf N/A 8500 lbf
CY44L N/A 0.38 in N/A 1.38 in N/A 0.8125 in N/A 0.75 in N/A 2620 rpm N/A 4200 lbf N/A 8500 lbf
CY48L N/A 0.44 in N/A 1.50 in N/A 0.9375 in N/A 0.875 in N/A 2250 rpm N/A 5000 lbf N/A 11300 lbf
CY52L N/A 0.44 in N/A 1.63 in N/A 0.9375 in N/A 0.875 in N/A 2250 rpm N/A 5000 lbf N/A 11300 lbf
CY56L N/A 0.50 in N/A 1.75 in N/A 1.0625 in N/A 1 in N/A 1970 rpm N/A 6400 lbf N/A 15850 lbf
CY60L N/A 0.50 in N/A 1.88 in N/A 1.0625 in N/A 1 in N/A 1970 rpm N/A 6400 lbf N/A 15850 lbf
CY64L N/A 0.63 in N/A 2.00 in N/A 1.3125 in N/A 1.25 in N/A 1570 rpm N/A 9600 lbf N/A 21200 lbf
CY72L N/A 0.63 in N/A 2.25 in N/A 1.3125 in N/A 1.25 in N/A 1570 rpm N/A 9600 lbf N/A 21200 lbf
CY80L N/A 0.75 in N/A 2.50 in N/A 1.5625 in N/A 1.5 in N/A 1310 rpm N/A 12800 lbf N/A 33000 lbf
CY88L N/A 0.75 in N/A 2.75 in N/A 1.5625 in N/A 1.5 in N/A 1310 rpm N/A 12800 lbf N/A 33000 lbf
CY96L N/A 1.00 in N/A 3.00 in N/A 1.8125 in N/A 1.75 in N/A 1060 rpm N/A 17000 lbf N/A 49900 lbf
CY128L N/A 1.25 in N/A 4.00 in N/A 2.3125 in N/A 2.25 in N/A 940 rpm N/A 30000 lbf N/A 89550 lbf
CY192L N/A 2.25 in N/A 6.00 in N/A 3.375 in N/A 3.25 in N/A 1060 rpm N/A 62900 lbf N/A 165500 lbf
CY104L N/A 1.00 in N/A 3.25 in N/A 1.8125 in N/A 1.75 in N/A 1060 rpm N/A 17000 lbf N/A 49900 lbf
CY112L N/A 1.13 in N/A 3.50 in N/A 2.0625 in N/A 2 in N/A 980 rpm N/A 24300 lbf N/A 63250 lbf
CY160L N/A 1.75 in N/A 5.00 in N/A 2.875 in N/A 2.75 in N/A 720 rpm N/A 47200 lbf N/A 136000 lbf
Unit of Measure
1